• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

Bluesky Ridge Filler Base Coats are a 2 in 1 product!

These thicker base coats are both a base AND a colour polish. Just add a top coat and your quick 2 product manicure is done!

Can also be used as a regular base coat. The thicker formula and colour do a great job at evening out any ridges or discoloration on the nail. 

Work great underneath Bluesky's builder- and acrygels. However the best option for those is still BASE 01.

Gel Polish:

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

Bluesky Ridge Filler Base Coats are a 2 in 1 product!

These thicker base coats are both a base AND a colour polish. Just add a top coat and your quick 2 product manicure is done!

Can also be used as a regular base coat. The thicker formula and colour do a great job at evening out any ridges or discoloration on the nail. 

Work great underneath Bluesky's builder- and acrygels. However the best option for those is still BASE 01.

Gel Polish:

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

Bluesky Ridge Filler Base Coats are a 2 in 1 product!

These thicker base coats are both a base AND a colour polish. Just add a top coat and your quick 2 product manicure is done!

Can also be used as a regular base coat. The thicker formula and colour do a great job at evening out any ridges or discoloration on the nail. 

Work great underneath Bluesky's builder- and acrygels. However the best option for those is still BASE 01.

Gel Polish:

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.

Bluesky Ridge Filler Base Coats are a 2 in 1 product!

These thicker base coats are both a base AND a colour polish. Just add a top coat and your quick 2 product manicure is done!

Can also be used as a regular base coat. The thicker formula and colour do a great job at evening out any ridges or discoloration on the nail. 

Work great underneath Bluesky's builder- and acrygels. However the best option for those is still BASE 01.

Gel Polish:

• Bluesky Gel Polish gives great coverage to your nails.
• Cured with a UV/LED Lamp.
• Last up to 14 days.

Preparing the Nails:

1. Use the Bluesky Nail File to file the nails to the desired shape you require.
2. Push the cuticles back and trim where you think is necessary.
3. Buff the nails gently with the Bluesky Nail Buffer.
4. Clean your nails with the Bluesky Cleanser Wipe.
5. Once this has been done wait for a few minutes.

Applying the Gel Polish (P.S Remember the thinner the coats the better the finish.)

1. Apply a thin layer of Bluesky Base Coat to all your nails, capping the end of the nails.
2. Remember to avoid the skin and cuticles.
3. Cure your nails for 30 seconds under the Bluesky Lamp.
4. Apply the professional color the same way you do a base coat (thin, cap the end and avoid the skin)
5. Cure the nails for 60 seconds.
6. Repeat the 4th and 5th step to help build up the color each time.
7. Apply a thin layer of Bluesky Top Coat just like the others.
8. Cure the nails for 60 seconds.
9. Unless you're using a No Wipe Top Coat then use a Bluesky Cleanser Wipe to help remove sticky residue leaving your nails super shiny.

Tip: If staining does occur then you can easily remove it with the Bluesky Cleanser.