Bluesky SOFT GEL MINI KIT COFFIN

• 1x Strong Adhesive Gel Gel Glue, 10ml
• 1 x Soft Gel Tips, Full Cover Tips 500pcs
• 1x 6W Mini LED-lamp

​Value 63€

​Use:

1. Make sure you're not in direct sunlight as gel products are light-sensitive.
2. Measure the correct size nail tips. The tip should reach from one side of the nail to the other. If you're in between 2 sizes, go with the larger one. Put the tips aside.
3. Push back the cuticles with a cuticle pusher.*
4. Shape the free edge of your natural nail with the nail file*.
5. Buff the surface of your nail with a buffer*. Dont overfile, as this can thin out the nail. You only want to remove the shine from your nail. Pay extra attention to the cuticle area and sides of the nail.
6. Clean the nail with a Cleanser Wipe*.
7. Apply a thin layer of PH Bond* to the nail. This will dehydrate the surface layers of the nail so that the gel sticks better. Let dry for a bit.
8. Apply a thin, even layer of Acid Free Primer*. Avoid skin contact. Let airdry for 1min. The primer dries down with a shiny finish. Do not touch the nail.
9. Paint on a thin, even layer of Strong Adhesive gel glue. Cure for 60sec.
10. Apply Strong Adhesive gel glue to the inside of your nail tip. Press the tip onto your nail starting at the cuticle area. Make sure that there are no air bubbles.
11. Hold the tip in place and cure for 15sec. Release the tip and cure properly for 60sec.
12. Repeat for each nail.
13. Use the buffer file and buff the Gel tips surface. Removing the shine gives your gel polish a better surface to stick to.
14. Cleanse the nail with a Cleanser Wipe. Now your nails are ready to decorate!
15. After you've decorated your nails, paint on a layer of No Wipe Top Coat*. Cure for 60sec. 
16. To finish off your manicure, apply cuticle oil to your cuticles to restore moisture.

*NOT included in the set. 

Removal:

1. Cut the gel tip using tip- or nail cutters.
2. Break the surface of the tip/gel polish by filing. Use a 100/180 grit shaping file for this.
3. Pour some acetone into a cotton pad and cover the nail. Cover the cotton pad with either aluminium foil or a soak off clip. This will help keep the cotton pad in place and stop the acetone from evaporating.
4. Let the acetone sit for 10-15min.
5. Carefully scrape off the dissolved gel from your nails with either an orange wood stick or a cuticle pusher. Be careful not to scrape your natural nail.
6. If there is still gel on the nail, you can file it off using the BS4 Buffer file.
7. Apply cuticle oil to the nails and skin to restore moisture.